Toshiba TCS-NET Setting Tool Manual

Toshiba
TCS-NET General Purpose Interface
Setting Tool Manual
12
DE89308701
7. Errors
7-1. Communication Error
7-2. System Errors
If normal operation is prevented due to the following errors, contact Global Sales Division /Engineering Consultant
Group of Toshiba Carrier Corporation.
Error Message Action
Time Out Check the following:
• Power supply to the GP
• Connection between PC and GP
• Connection of the serial cable
• COM port setting
• Timeout period setting
If this error still occurs after these connections and settings are checked, contact
Global Sales Division /Engineering Consultant Group of Toshiba Carrier
Corporation.
Error Message Description
Format Error(GP) Receive data from GP is incorrect
FCC error GP’s FCC error
PN error Pattern number error
PN error(Erase) Erase pattern number error
STX code error GP’s STX code error
ACK: FCC error FCC error
ACK: DL error DL error
ACK: Format error Format error
ACK: Memory full Outside the EEPROM area
ACK: PN error Pattern number error
ACK: Pattern Exist Specified pattern exists during write operation
ACK: Command error Command (STX) error
+00DE89308701_01EN_General_Setting_Tool_M.book Page 12 Thursday, November 27, 2008 1:17 PM

Toshiba TCS-NET Specifications

General

Brand	Toshiba
Model	TCS-NET
Category	Recording Equipment
Language	English