Toshiba TOSVERT VF-AS3 Installation Manual

3
E6582188
Thank you for purchasing the “Flange mounting kit” for TOSVERT VF-AS3.
This Flange mounting kit is used for following VF-AS3 series Inverter.
• VFAS3-4900PC, VFAS3-4110KPC, VFAS3-4132KPC
• VFAS3-2450P, VFAS3-2550P
And this kit is also available when the braking unit option,
• PB7-4132K
is equipped with the above Inverter.
This manual explains how to install the Flange mounting kit with Inverter.
Refer to VF-AS3 instruction manual (E6582062) and PB7-4132K instruction manual (E6582168) for the operation
procedure, parameters, measures for protective functions (when an alarm/trip occurs), etc what this manual does not
indicate.
1. Introduction

Toshiba TOSVERT VF-AS3 Specifications

General

Model	TOSVERT VF-AS3
Category	Inverter
Overload Capacity	150% for 60 seconds
Cooling Method	Forced Air Cooling
Control Method	V/f control, Sensorless vector control
Braking Unit	Built-in
Communication Protocols	Modbus RTU, DeviceNet, Profibus DP
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Ground Fault
Enclosure	IP20
Operating Temperature	-10°C to +50°C
Humidity	5-95% (non-condensing)
Altitude	Up to 1000m