Toshiba W-614 User Manual

16
Incoming Antenna/Cable(CATV) Signals
The VCR scans through all receivable TV and CATV channels and stores only the active
ones in your area into the memory. Once the storing is finished, you can select a desired
channel using CH/TRK .
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press I.SELECT so that the channel number will appear if “L1” or “L2” is displayed in the VCR display.
Incoming Antenna/Cable(CATV) Signals
1
Press PROG . to display the MENU screen.
2
Select “PRESET” using FF or REW ,
and press ENTER .
3
Select “CH MEMORY” using PLAY
or STOP , and press ENTER .
4
Set “TV/CATV“ to “TV” or “CATV” using FF or REW .
TV: To store channels received via the antenna.
CATV: To store channels received via the incoming cable.
5
Select “AUTO SCAN” using PLAY or
STOP , and press FF to set to “ON”.
The VCR starts scanning and the
channels are stored in the VCR in
ascending order. When the scanning is
finished, the screen automatically
returns.
6
Press PROG. twice to exit.
PREPARATION
Storing Channels on the VCR
This section is required if you receive only normal TV or unscrambled cable channels, or use a cable box
between your TV and the VCR.
E n D : PROG
TV/CATV TV CATV
AUTO SCAn OFF On
ADD CH - - CH
ERASE CH - - CH
E n D : PROG
AUTO SCA n 2 CH on
FF
ENTER
I.SELECT
SLOW
PAUSE/STILL
STOP
FF
REC
TIMER
VC-613
A.SELECT
TV
VCR
POWER
I.SELECT
SP/ SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REW
PLAY
REMAIN/
RESET
COUNT
EJECT
REW
STOP
FF
PLAY
100
REW
PLAY,STOP
1,6
1
2
3
4
5
0
100
6
9
8
7
Number button
s
ENTER
E n D : PROG
ENTER
CLOCK SET
CH MEMORY
W-614/612/TSB DRAFT(10-18) 11/12/01, 12:0116

Toshiba W-614 Specifications

General

Brand	Toshiba
Model	W-614
Category	VCR
Language	English