Toshiba W-627 User Manual

19
PLAYBACK
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound
(Digital Auto Tracking).
If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the
tracking manually.
Notes
• During the adjusting, the playback picture and sound may be distorted.
• The digital auto tracking is activated only in the playback mode.
• The noise on the screen may not be completely eliminated depending on the tape used, especially when the
tape was recorded on another VCR.
Basic Playback
1
Load a recorded cassette.
Power is turned on.
If the cassette has no safety tab,
playback starts automatically.
2
Press PLAY/x2 to start playback.
3
To stop playback, press STOP .
Rewinding / Fast-forwarding
Press
REW or FF in the stop mode.
S
SLP
VCR
REC
L
TIMER
VCR
PLAYBACK
Playback
This section explains the basic playback operation.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press VCR to set the remote control operating the VCR.
VCR
REC
L
TIMER
TV
VCR
PROG. ENTER
TV/VCR
POWER
CH/TRK
TV VOL
I.SELECT
REMAIN/
COUNTER
DISPLAY COUNT RESET
SP/SLP
REC
TIMER
SLOW
PLAY/x2
PAUSE/STILL
REW FF
1
2
3
456
7
8
9
CANCEL
A.SELECT
EJECT
0
100
CM SKIP
CH/TR
K
CURSOR
STOP
3
2,
FF
REW
1
Press PLAY/x2 during playback.
A tape runs at double speed
playback.
Double Speed Playback
To resume normal playback Press
PLAY/x2
S-VHS Quasi Playback (SQPB)
• This VCR can also play back at tape which is recorded in S-VHS format.
But the playback pictures does not have the same quality and resolution as the original S-VHS
playback picture.
• This VCR cannot record in S-VHS format.
• SQPB is an abbreviation for S-VHS Quasi Playback.
W-627 Eng(19-23) 2/28/02, 3:26 PM19

Toshiba W-627 Specifications

General

Type	VHS
Tuner	Yes
Remote Control	Yes
Weight	3.5 kg
Playback Speed	SP, LP
Inputs	Composite
Outputs	Composite
Power Consumption	18W

Summary

Safety Precautions

Important Precautions

Avoid Volatile Liquid

Moisture Condensation

Guidance on preventing damage from temperature changes and moisture.

Important Safety Instructions

Power Sources

Information on the correct type of power source for the unit.

Grounding or Polarization

Explains the polarized plug and its safety feature.

Ventilation

Importance of not blocking ventilation openings for cooling.

Heat

Water and Moisture

Power-Cord Protection

Guidance on routing power cords to prevent damage or hazards.

Overloading

Warning against overloading outlets and extension cords.

Outdoor Antenna Grounding

Information on proper grounding for outdoor antennas for surge protection.

Lightning

Instructions to unplug the unit during storms to prevent damage.

Object and Liquid Entry

Warnings against inserting objects or spilling liquids into the unit.

Damage Requiring Service

Conditions under which the VCR requires professional servicing.

Servicing

Advises against self-servicing and refers to qualified personnel.

Replacement Parts

Safety Check

Recommends safety checks after servicing.

Connections

Antenna/VCR/TV Connection

Setting the VCR Output Channel

AUDIO/VIDEO Connections

Cable Connection

Auto Set Up

Auto Set up

Process for automatic clock and channel setting upon plugging in.

Initial Settings Using On-screen Display

Setting the Language

Optional settings on the SET UP screen

Setting the Clock

Storing Channels on the VCR

Incoming Antenna/Cable(CATV) Signals

Process for scanning and storing receivable TV and CATV channels.

Playback

Basic Playback

Double Speed Playback

Adjusting the tracking

How to adjust tracking for clear playback.

S-VHS Quasi Playback (SQPB)

Variable Speed Playback

Picture Search

Commercial Movie Skip

Still Picture

Adjusting Still Picture Stability

Recording a TV Program

Basic Recording

Step-by-step guide for basic recording.

Watching a TV program while recording another

Skipping unnecessary scenes while recording

Recording off time setting

Timer Program Recording

Timer Programming Procedure

Detailed steps for setting up timer recordings.

Confirming the timer programs

Changing/cancelling the timer programs

Error indication

To cancel the Timer Recording

Before Calling Service Personnel

No Power Issues

Troubleshooting steps for when the VCR has no power.

Hi-Fi Sound Noise Issues

Diagnosing and fixing noise in Hi-Fi sound playback.

Timer Recording Malfunction

Resolving issues with the timer recording feature.

Remote Control Problems

Steps to fix a malfunctioning remote control.

Cassette Ejection Issues

Troubleshooting why a cassette ejects immediately after loading.

Cassette Insertion Problems

Solutions for when a cassette cannot be inserted.