Your thermostat provides complete,
automatic control over heating and
cooling with auto changeover. Auto
changeover means your system will
automatically heat or cool as needed to
maintain your temperature set points.
NOTE: If auto changeover is not necessary
in your area of the country, your installer
may disable the AUTO mode.
Auto changeover makes life easier
because you no longer have to manually
switch the thermostat between heating
or cooling operation. Just set your heating
and cooling set points and let the system
do the rest!
AUXILIARY HEAT indicator is
displayed...
The AUX HT indicator appears on the heat
pump version of the thermostat only. It is
displayed when your
system is operating on auxiliary heat.
CLEAN FILTER indicator is displayed..
The clean FILTER indicator tells you when
to clean or replace your air filter. Press the
RESET FILTER button after cleaning or
replacing the filter to turn off the indicator
and reset the system.
NOTE: This indicator does not reflect a
problem with your system.
NOTE: This indicator does not reflect a
problem with your system.
To Next Page
Loading...
Need help?
General
