01_SEQUOIA_U (L/O 0009)
252
2001 SEQUOIA (OM34414U)
—Loosening wheel nuts
4. Loosen all the wheel nuts.
Always loosen the wheel nuts before rais-
ing the vehicle.
Turn the wheel nuts turn counterclockwise
to loosen. To get maximum leverage, fit
the wrench to the nut so that the handle
is on the right side, as shown above.
Grab the wrench near the end of the han-
dle and pull up on the handle. Be careful
that the wrench does not slip off the nut.
Do not remove the nuts yet—just unscrew
them about one−half turn.
—Positioning the jack
Front Rear
5. Position the jack at the correct jack
point as shown.
Make sure the jack is positioned on a
level and solid place.
JACK POINTS:
Front—Under the frame side rail
Rear—Under the rear axle housing
Put a jack handle, jack handle extension
and jack handle end together as shown in
the illustration.
1 Jack handle end
2Jack handle extension
3Jack handle
CAUTION
Make sure they are each securely
fixed with screws.