’03 4Runner_U (L/O 0211)
11
2003 4RUNNER from Oct. ’02 Prod. (OM35804U)

When starting the engine, do not
use the key with other transponder
keys around (including keys of oth-
er vehicles) and do not press other
key plates against the key grip.
Otherwise the engine may not start,
or may stop soon after it starts. If
this happens, remove the key once
and then insert it again after taking
off other transponder keys (includ-
ing keys of other vehicles) from the
ring or while gripping or covering
them with your hand to start the
engine.

Do not bend the key grip.

Do not cover the key grip with any
material that cuts off electromagnet-
ic waves.

Do not knock the key hard against
other objects.

Do not leave the key exposed to
high temperatures for a long period,
such as on the dashboard and hood
under the direct sunlight.

Do not put the key in water or
wash it in an ultrasonic washer.

Do not use the key with electromag-
netic materials.
To Next Page
Loading...
Need help?
General
