EasyManuals Logo
Home>Toyota>Automobile>2003 4Runner navigation system

Toyota 2003 4Runner navigation system User Manual

Toyota 2003 4Runner navigation system
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
’03 4Runner_U (L/O 0211)
23
2003 4RUNNER from Oct. ’02 Prod. (OM35804U)
3. Put a new transmitter battery with posi-
tive (+) side up.
Close the transmitter case securely.
NOTICE
Make sure the positive side and
negative side of the transmitter bat-
tery should be faced correctly.
Do not replace the battery with wet
hands. Water may cause unexpected
rust.
Do not touch or move any compo-
nents inside of the transmitter, or
it may interfere with proper opera-
tion.
Be careful not to bend the electrode
of the transmitter battery insertion
and that dust or oils do not adhere
to the transmitter case.
Close the transmitter case securely.
After replacing battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, con-
tact your Toyota dealer.
The windows can be operated with the
switch on each side door.
The power windows work when the ignition
switch is in the “ON” position.
Key off operation: If both front doors are
closed, the driver’s window works for 43
seconds even after the ignition switch is
turned off. It stops working when either
front door is opened.
The indicator light (“AUTO”) on the switch
tells you the switch can be operated.
Power windows

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toyota 2003 4Runner navigation system and is the answer not in the manual?

Toyota 2003 4Runner navigation system Specifications

General IconGeneral
BrandToyota
Model2003 4Runner navigation system
CategoryAutomobile
LanguageEnglish

Related product manuals