Toyota 2007 Sequoia User Manual

68
2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)
! When reinstalling the seat, make
sure the seat is securely locked by
pushing forward and rearward on
the top of the seatback or by trying
to pull up the edge of the bottom
cushion. Failure to do so will pre-
vent the seat belt from operating
properly.
! Install each seat in the same posi-
tion from which it was removed.
Failure to do so will prevent third
seat occupants from using seat
belts properly.
! Do not reinstall the seat with its
back facing forward.
! Make sure the seat is securely
locked in the proper position.
NOTICE
Avoid putting heavy loads on the re-
moved seat. The metallic tips of the
seat leg may be damaged and the
seat cannot be reinstalled.
u13120
If the seat legs are locked in the wrong
position, pull up the left side lever un-
der the seat. Then lift and remove the
seat.
u13238
Front seats
u13239
Second seats (bench type)
07 05.22
Head restraints

Toyota 2007 Sequoia Specifications

General

Brand	Toyota
Model	2007 Sequoia
Category	Automobile
Language	English