Toyota 4RUNNER 2010 User Manual

223
2-4. Using other driving systems
2
When driving
Four-wheel drive system (part-time 4WD models)
Use the front-wheel drive control lever to select the following trans-
fer modes:
The four-wheel drive indicator comes on when H4, N or L4 mode is
selected.
H2 (high speed position, two-wheel drive)
Normal driving.
H4 (high speed position, four-wheel drive)
Greater traction than two wheel drive.
For when you experience a loss of power, such as wheel slipping.
N (neutral position)
No power is delivered to the wheels.
L4 (low speed position, four-wheel drive)
For driving requiring maximum power and traction such as climbing or
descending steep hills, off-road driving and hard pulling in sand or mud,
etc.
Four-wheel drive indicator
Low speed four-wheel drive indicator
CTH24AS015

Toyota 4RUNNER 2010 Specifications

General

Brand	Toyota
Model	4RUNNER 2010
Category	Automobile
Language	English