’98 AVALON (USA/CANADA)- U
214
Replacing light bulbs—
The following illustrations show how to
gain access to the bulbs. When replacing
a bulb, make sure the ignition switch and
light switch are off. Use bulbs with the
wattage ratings given in the table.
CAUTION
Halogen bulbs have pressurized gas
inside and require special handling.
They can burst or shatter if scratched
or dropped. Hold a bulb only by its
plastic or metal case. Do not touch
the glass part of a bulb with bare
hands.
NOTICE
Only use a bulb of the listed type.
Light bulbs
Bulb
No.
W Type
Headlights
(low beam)
9006 51 A
Headlights
(high beam)
9005 60 B
Front fog lights — 55 C
Parking and front turn
signaol lights
3157
NA
27/8 E
Rear turn signal lights 7440 21 E
Stop and tail lights 7443 21/5 E
Rear side marker lights 168 3.8 E
Back- up lights 921 18 E
License plate lights 168 5 E
High mounted
stop light
921 18 E
Interior light — 8 F
Front personal lights — 8 D
Rear personal lights — 8 D
Glovebox light — 1.2 E
Door courtesy lights 194 5 E
Trunk light — 3 F
A: HB4 halogen bulbs
B: HB3 halogen bulbs
C: H3 halogen bulbs
D: Single end bulbs
E: Wedge base bulbs
F: Double end bulbs
—Headlights
1. Unplug the connector while depress-
ing the lock release.
If the connector is tight, wiggle it.
To Next Page
Loading...
Need help?
General
