26 2-1. Maintenance and care
Cleaning and protection of the vehicle
Decal maintenance
Caring for the decals
Special care must be taken to avoid abrading or scratching the decal.
Scratching and abrasion marks may be visible and you may not be able
to work them out of the unique nish of the decal. To help avoid such
damage, avoid using harsh chemicals, brushes or hard scrubbing when
cleaning your vehicle.
Use a cleaner designed for high-quality painted surfaces. The cleaner
must be wet, non-abrasive, without strong solvents, and have a pH value
between 3 and 11 (neither strongly acidic nor strongly alkaline).
Rinse thoroughly after cleaning and dry with a clean, soft cloth or soft
rubber squeegee to avoid water spots.
Do not apply waxes, polishes, paint or clear coat over these decals.
Power washing decals
Power washing or pressure washing may be used. However, aggressive
washing can damage the decal. Excessive pressure during power washing
can damage the decal by forcing water underneath the decal. Water
lessens the adhesion of the decal to the substrate allowing the decal to
lift or curl. These problems are magnied by wind. To avoid edge lifting or
other damage to the decals, follow these important steps:
1
2
4
DECAL LOCATIONS
3
To Next Page
Loading...
Need help?
General
