416
4-5. Using the driving support systems
LC150_OM_OM60R93E_(GE)
■ When using Toyota parking assist-sensor
In the following situations, the system may not function correctly due to a
sensor malfunction etc. Have the vehicle checked by your Toyota dealer.
● A beep does not sound when you turn the Toyota parking assist-sensor
on.
● If the area around a sensor collides with something, or is subjected to
strong impact.
● If the bumper collides with something.
With a Toyota parking assist-sensor indicator
● The rear corner and center indicators flash, and a beep sounds when no
obstacles are detected.
● If the rear corner and center indicators show continuously without a beep.
● If a indicator error occurs, first check the sensor.
If the error occurs even when there is no ice, snow or mud on the sensor, it
is likely that the sensor is malfunctioning.
Without a Toyota parking assist-sensor indicator
● The Toyota parking assist-sensor operation display flashes, and a beep
sounds when no obstacles are detected.
● If the display shows continuously without a beep.
● If a display error occurs, first check the sensor.
If the error occurs even when there is no ice, snow or mud on the sensor, it
is likely that the sensor is malfunctioning.
■ Notes when washing the vehicle
Do not apply intensive bursts of water or steam to the sensor area.
Doing so may result in the sensor malfunctioning.
To Next Page
Loading...
Need help?
General
