TP-Link Deco P7 User Manual

Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports and a power slot. See the explanation below:
2
For connecting Deco to your modem, the
Ethernet outlet or other internet devices.
Press to reset Deco to factory default
settings.
For connecting Deco to the power socket via
the provided power adapter.
Ethernet Ports:
Reset Button:
Power Slot:
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup.
Blue solid:
Deco is setting up.
Green pulse:
Deco is upgrading firmwa e.
Green solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Greeneen
The powerline backhaul network is in good condition.
Orange The powerline backhaul network is in poor condition or it is not established.
The LED on the power adapter indicates the powerline backhaul network status:
LED Indication

TP-Link Deco P7 Specifications

General

Wi-Fi	Yes
Certification	FCC CE
Product color	White
WAN connection	Ethernet (RJ-45)
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Adapter included	-
Antennas quantity	4
Cabling technology	10/100/1000Base-T(X)
PowerLine standard	HomePlug AV
Security algorithms	WPA-PSK, WPA2-PSK
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
WLAN data transfer rates supported	400, 867 Mbit/s
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	0 - 90 %

Weight and Dimensions

Width	120 mm
Height	38 mm