Option ONE: Using a Web Browser
LED Explanation
Button Explanation
2.4GHz/5GHz
On: The extender is connected to both
2.4GHz and 5GHz Wi-Fi bands of your host
network.
Off: No connection.
Power
On/Off: The extender is on/off.
Blinking: The extender is initializing.
(RE)
Solid Blue: The extender is connected to
the router, and is in a good location.
Solid Red: The extender is connected to
the router, but too far away from the router.
Blinking: WPS connection is in progress.
Off: No active connection.
Power button: Press the Power button to turn the extender on or off.
LED button: Press the LED button to turn all LEDs on or off.
Plug the extender into an electrical
outlet near your router, and wait until the
Power LED is lit and solid blue.
Connect automatically Connect
TP-LINK_Extender_2.4GHz
TP-LINK_Extender_5GHz
√
Disconnect the Ethernet (wired)
connection to your computer. Click the
Wi-Fi icon on the taskbar and connect to
the extender's network :
TP-LINK_Extender_2.4GHz or _5GHz.
2
Using a Web Browser
Option ONE
1
LoginPower on
Configure
3
If your router does not support 5GHz wireless
network, please click Skip to continue.
Select your router's 2.4GHz and 5GHz host
network and enter the password, then click
Next.
Next
Please select 2.4GHz Host network or skip this network.
SSID Signal
MAC Address
Security
Your router wireless name
30:B5:C1:33:99:76
Host 2.4GHz Password:
TP_LINK_123456
23:B5:C0:30:90:06
Back Other... Rescan Skip
Region
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
12345678
http://tplinkrepeater.net
admin
admin
Login
Launch a web browser and type
http://tplinkrepeater.net in the address
field. Use admin (all lowercase) for both
Username and Password to log in.
If the login window does not pop up,
please refer to the FAQ > Q1.
1
1 2
4
5
Select your country/region, then click Next.
Verify your wireless settings and click Finish.
The Corresponding LEDs ( and )
should turn on and stay solid, indicating
successful connections.
Region
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Extended 2.4GHz SSID:
Your network name
Copy Host SSID
Hide SSID broadcast
The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Your network name_5G
Copy Host SSID
Hide SSID broadcast
The extended 5GHz password is the same as your Host password.
Back Next
2
Create a new username and password
to log in the web-based interface, then
click Confirm.
Either keep the same SSIDs as your host
network or create new names for the
extended networks, then click Next.
4
Relocate
Both 2.4GHz and 5GHz extended networks share the same Wi-Fi password as your host network,
but may have different wireless network names if you customize the names during the configuration.
Enjoy!
3
Per FCC regulations, all Wi-Fi products
marketed in the U.S. are fixed to the U.S.
region.
Exit
Next
Region
2.4GHz Host Network
5GHz Host Network
Wireless Settings
Summary
Region:
Please select your country/region.
Choose a location away from Bluetooth devices
and other household electronics, such as cordless
phone, microwave, and baby monitor, etc., to
minimize signal interference.
Keep away from
Ideal Extender Placement
Host Network
Extended Network
Red: Too far awayBlue: Ideal location
Plug the extender into an electrical outlet about halfway between your router (Host Network) and the Wi-Fi
dead zone.
Wait until the LED is lit with a solid blue. If not, relocate the extender closer to the router to achieve a
good (or better) signal quality.
1
2
To Next Page
Need help?
General
Weight and Dimensions
