EasyManuals Logo
Home>Trane>Heat Pump>4TTR4036L

Trane 4TTR4036L User Manual

Trane 4TTR4036L
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6 18-AC51D1-8-EN
Line Length
Line Sizes Service Valve Connection Sizes
Model
Vapor
Line
Liquid
Line
Vapor Line
Connection
Liquid Line
Connection
4TTR4018L 3/4 3/8 3/4 3/8
4TTR4024/25L
3/4 3/8 3/4 3/8
4TTR4030/31L
3/4 3/8 3/4 3/8
4TTR4036/37L
3/4 3/8 3/4 3/8
4TTR4042/43L
7/8 3/8 7/8 3/8
4TTR4048L 7/8 3/8 7/8 3/8
4TTR4060L 7/8 3/8 7/8 3/8
Section 5. Refrigerant Line Considerations
5.1 Refrigerant Line and Service Valve Connection Sizes
Table 5.1
5.3 Required Refrigerant Line Length
5.2 Factory Charge
5.4 Refrigerant Line Insulation
Important: The Vapor Line must always be
insulated. DO NOT allow the Liquid Line and
Vapor Line to come in direct (metal to metal)
contact.
Vapor Line
Liquid Line
Insulation
Determine required line length and lift. You will
need this later in STEP 2 of Section 14.
Total Line Length = __________ Ft.
Total Vertical Change (lift) = __________ Ft.
Trane outdoor condensing units are factory charged with the system charge required for the outdoor condensing
unit, fifteen (15) feet of tested connecting line, and the smallest indoor evaporative coil match. If connecting line
length exceeds fifteen (15) feet and/or a larger indoor evaporative coil is installed, then final refrigerant
charge adjustment is necessary.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trane 4TTR4036L and is the answer not in the manual?

Trane 4TTR4036L Specifications

General IconGeneral
BrandTrane
Model4TTR4036L
CategoryHeat Pump
LanguageEnglish

Related product manuals