Trane NTXAMT A Series User Manual

OPERATING PROCEDURE PHOTOS/FIGURES
1. Removing the panels
(1) Remove all the screws fixing the top panel, and remove
the top panel.
(2) Remove all the screws fixing the service panel.
(3) Pull down on the service panel, and remove the service
panel.
(4) Disconnect the power supply cord and indoor/outdoor
connecting wires.
(5) Remove all the screws fixing the front panel, and remove
the front panel.
(6) Remove all the screws fixing the back panel, and remove
the back panel.
98
12-2. NTXMMX24A132AA NTXMMX30A132AA NTXMMX36A142AA
Photos: NTXMMX36A142AA
NOTE: Turn OFF the power supply before disassembly.
Photo 1
Photo 3
Screws of the service panel
Service panel
Screws of the front panel
Catch of the front panelCatch of the front panel
Screws of the top panel
Screws of the front panel
Screws of the top panel
Screws of the back panel
Photo 2
OBHT702

Trane NTXAMT A Series Specifications

General

Brand	Trane
Model	NTXAMT A Series
Category	Air Conditioner
Language	English