Trane R-410A Split System User Manual

TEMP. setting button
Each time TEMP + or TEMP - button is pressed, the set temperature will be increased or decreased
by 1ºC.
Adjusting range is 16~30ºC . In AUTO mode, this button does not function.
AUTO key
When the unit is stop, press AUTO key, the unit will run under AUTO mode and the swing motor
starts.
When the unit is running, press AUTO key, the unit will be stopped.
Timer control
The unit is turned on or off according to the timer set by the remote controller.
Sleep control
When the air conditioner is in COOL or DRY mode, after Sleep mode has been set properly, the
preset Tset will be increased by 1ºC after the sleep program has run for 1 hour, and Tset will be
increased by another 1ºC after 2 hours. Tset has been increased by 2ºC total in two hours. Then the
unit will run at this set temperature and at the set speed.
When the air conditioner is in HEAT mode, after Sleep mode has been set properly, the preset Tset
will be decreased by 1ºC after the sleep program has run for 1 hour, and Tset will be decreased by
another 1ºC after 2 hours. Tset has been increased by 2ºC totally in two hours. Then the unit will
run at this set temperature and at the set speed.
In AUTO or FAN mode, the setting temp. will not change.
Handling switch
AUTO/STOP
Set temp.T
set
1 h 2 h Above 2h
T
set
+2
T
set
+1
T
set
1 h 2 h Above 2h
T
set
T
set
-1
T
set
-2
Set temp.T
set
37

Trane R-410A Split System Specifications

General

Brand	Trane
Model	R-410A Split System
Category	Air Conditioner
Language	English