SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
October 2022 SS88VV22--SSVVXX000011--11AA--EENN
Link Communicating or 24 Volt Gas-Fired 2 Stage Induced
Draft Furnaces with Variable Speed Motor
UUppffllooww,, DDoowwnnffllooww,, HHoorriizzoonnttaall RRiigghhtt//LLeefftt
Two Stage
S8V2A040M3PC/D
S8V2B060M4PC/D
S8V2B080M4PC/D
S8V2C080M5PC/D
S8V2C100M5PC/D
S8V2D120M5PC/D
NNoottee:: Models that have a “D” in the 12th digit designating they meet California
less than 40 ng/J (NOx) emissions requirements.
NNoottee:: Graphics in this document are for
representation only. Actual model may
differ in appearance.
The Diagnostics Mobile App is available by scanning a QR code
located inside this unit or by searching for the Link Diagnostics
App in your App Store.
When using the Link Communicating protocol, the furnace must
be used with A/T HUI2360A200U thermostat and
TSYS2C60A2VVU* System Controller.
Installation, Operation, and Maintenance
To Next Page
Need help?
General