TRANSTEK LS206-E User Manual

The LS206-E is intended for use in the electromagnetic environment specified below. The
customer or the user of the LS206-E should assure that it is used in such an environment
The LS206-E are suitable for use
in all establishments other than domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
The LS206-E are not suitable for interconnection with
other equipment.
17
Guidance and manufacturer’s declaration – electromagnetic emissions
Emissions Compliance Electromagnetic environment-- guidance
Harmonic
emissions
IEC 61000-3-2
Not applicable
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Not applicable
RF emissions
CISPR 11
Complies
16
d) Environmental conditions for transport and storage
The technical description shall contain a specification of the permissible environ-
mental conditions for transport and storage which shall be repeated on the outside of the
packaging of the EQUIPMENT
[see Sub-clause 6.1 v)]
6.8.4 Not used.
6.8.5 Not used.
Compliance with the requirements of Sub-clause 6.8 is checked by inspection of the
ACCOMPANYING DOCUMENTS.

TRANSTEK LS206-E Specifications

General

Brand	TRANSTEK
Model	LS206-E
Category	Scales
Language	English