TRANSTEK LS206-E User Manual

9
8
III. Measuring(select user manually)
a) Press user symbol on the platform to select user.
b) Please wait until the LCD displays “ ”.
c) Step onto the platform with bare feet.
d) Stand still and the weight data will be locked automatically.
e) The measuring will start automatically with the “ ” signal moving from left to right.
f) When the measurement is completed, the results appears repeatedly twice.
g) When the measurement is completed, the results appears repeatedly twice.
g) When the measurement is completed, the results appears repeatedly twice.
IV. Measuring(user identification automatically)
a) Please step onto the platform direct ly with bare feet to turn on.
b) Stand still and the weight data will be locked automatically
c) The measuring will start automatically with the “ ” signal moving from left to right.
d) If there is only one user whose last weight data is close to the current one, it will be
selected automatically. The results will be shown repeatedly twice and transmitted.
e) If there are more than one user whose last weight data are close to the current one,
they would be shown on the LCD.
f) Please press the user symbol on the platform to select the user to continue.
g) Note: If there is no operation, the scale will display the weight only then turn off.
h) When the measurement is completed, the results appears repeatedly twice and then the
results will be transmitted.

TRANSTEK LS206-E Specifications

General

Brand	TRANSTEK
Model	LS206-E
Category	Scales
Language	English