Why is detergent not mixing with spray in my Troy-Bilt 020242-4?
If the detergent fails to mix with the spray in your Troy-Bilt Pressure Washer, there are a few things you can check: * Make sure the detergent siphoning tube is fully submerged in the detergent. * Inspect the chemical filter for clogs or cracks; clean or replace the filter/detergent siphoning tube if needed. * Replace the high-pressure nozzle with a low-pressure nozzle.
General| Flow Rate | 2.3 GPM |
|---|---|
| Pump Type | Axial Cam |
| Hose Length | 25 feet |
| Engine Type | 4-Cycle OHV |
| Nozzle Type | Quick Connect |
| GPM | 2.3 GPM |
| Nozzles | 0°, 25°, 40°, Soap |
Provides details about the pressure washer's features and specifications.
Explains various hazard symbols and their implications for user safety.
Details risks of carbon monoxide from engine exhaust and safe operating practices.
Warns about puddles and slippery surfaces created by the pressure washer.
Alerts users to the risk of electrocution from spray contact with wiring.
Explains kickback from starter cord and how to avoid it.
Warns about hot engine parts and exhaust gases causing burns or fire.
Alerts users to the danger of entanglement with moving engine parts.
Details the risk of serious injury from high-pressure water.
Warns that spray can dislodge paint chips or particles.
Warns about unintentional sparking causing fire or electric shock.
Advises against tampering with governed speed or exceeding rated pressure.
Warns of injury and damage from high-pressure spray.
Alerts that high-pressure spray can damage fragile items like glass.
Warns that improper use can damage the washer and shorten its life.
Identifies and explains the various controls and components of the pressure washer.
Instructions for safely removing the pressure washer from its packaging.
Lists all components included in the pressure washer package.
Outlines the essential steps to prepare the washer before initial operation.
Step-by-step guide for attaching the handle and accessory tray.
Instructions for adding the correct engine oil and fuel before operation.
Details on connecting the high pressure hose and garden hose to the unit.
A checklist to ensure all assembly and preparation steps are completed.
Guidelines for safe placement and clearance around the pressure washer.
Step-by-step instructions for starting the pressure washer engine.
Procedures for safely shutting down the pressure washer.
Instructions on how to store the spray gun and nozzle extension.
Guide to selecting and using different spray tips for various cleaning tasks.
Steps for using detergents with the pressure washer.
Instructions for rinsing surfaces after cleaning.
Procedure for flushing the chemical injection system after use.
Explanation of the pump's thermal relief system.
Essential checks to perform before each operation of the pressure washer.
Procedure for inspecting and cleaning the water inlet screen.
Instructions for inspecting the high-pressure hose for damage or leaks.
Guide for inspecting the detergent tube and its filter.
Procedure for inspecting the spray gun and nozzle extension assembly.
Steps to check and service the in-line filter.
How to clean spray tips to resolve pulsing issues.
Information on obtaining and using an O-ring maintenance kit.
States that the pump is pre-lubricated and sealed, requiring no maintenance.
Refers the user to the engine operator's manual for engine maintenance.
Explains the importance of the data tag and where to find it.
Steps to protect the pump from freeze damage and mineral deposits.
Detailed instructions for preparing the pressure washer for storage.
Refers the user to the engine operator's manual for engine storage.
Addresses problems with low pressure, erratic pressure, and low water volume.
Solutions for when detergent fails to mix with the spray.
Addresses engine speed issues and stopping during operation.
Outlines the terms and conditions of the limited warranty for the equipment.
Details what is covered and excluded by the warranty, including normal wear and misuse.
To Next Page
