14
OPERATION
A
E
F
H
I
J
K
D
C
B
G
Figure 18
NOTE: This Operator’s Manual covers several models. Tractor
features may vary by model. Not all features in this manual are
applicable to all tractor models and the tractor model depicted
may differ from yours.
NOTE: All references in this manual to the left or right side and
front or back of the tractor are from the operating position only.
Exceptions, if any, will be specified.
A. Drive Pedal (Foot Control CVT Models)
(If Equipped)
Depress the drive pedal forward to allow the tractor to travel. The
further forward the pedal is depressed, the faster the tractor will
travel. The pedal will return to its original/neutral position when
it is not depressed.
B. Speed Control Lever (Hydrostatic Models)
To drive forward or in reverse,
slowly move the Speed Control
Lever to the desired “F” forward
or “R” reverse speed.
To stop, move the Speed Control
Lever to the “N” neutral position.
When mowing, place the
Speed Control Lever in the
“Cutting Speed” position, or a
slower forward speed for the
best results.
To Next Page
Loading...
Need help?
General
