EasyManuals Logo
Home>Troy-Bilt>Pressure Washer>2500 PSI

Troy-Bilt 2500 PSI User Manual

Troy-Bilt 2500 PSI
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Operation
If you have any problems operating your pressure washer,
please call the pressure washer helpline at (888) 611-6708.
Pressure Washer Location
Clearances and Air Movement
Place pressure washer outdoors in an area that will not
accumulate deadly exhaust gas. DO NOT place pressure
washer where exhaust gas (A) could accumulate and enter
inside or be drawn into a potentially occupied building.
Ensure exhaust gas is kept away from any windows, doors,
ventilation intakes, or other openings that can allow exhaust
gas to collect in a confined area. Prevailing winds and air
currents should be taken into consideration when positioning
pressure washer.
A
WARNING
Exhaust heat/gases can ignite combustibles,
structures or damage fuel tank causing a fire.
Keep at least 5 ft. (1.5 m) clearance on all sides of pressure
washer including overhead.
WARNING
Running engine gives off carbon monoxide, an
odorless, colorless, poison gas.
Breathing carbon monoxide can cause headache,
fatigue, dizziness, vomiting, confusion, seizures,
nausea, fainting or death.
Operate pressure washer ONLY outdoors.
Keep exhaust gas from entering a confined area through
windows, doors, ventilation intakes, or other openings.
DO NOT start or run engine indoors or in an enclosed area, even
if windows and doors are open.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Troy-Bilt 2500 PSI and is the answer not in the manual?

Troy-Bilt 2500 PSI Specifications

General IconGeneral
BrandTroy-Bilt
Model2500 PSI
CategoryPressure Washer
LanguageEnglish

Related product manuals