True Induction S2F2 User Manual

III. Specicaons
Power: ETL rated for 15 amp circuit
Voltage: 120v / 60Hz
Temperature Range: 150°F - 450°F (exact temperature sengs)
Level Selecon: Select sengs 1 through 10
Max Time: Set mer up to 150 minutes
Material: Glass Ceramic Top
Single Burner Unit Measurements: 23.5” width x 15” length x 3” height
IV. How To Use
-Plug the power plug into a standard outlet.
-The ON/OFF switch will light up and the unit will sound to indicate on.
-The device will remain in standby mode, awaing user direcon.
-Place ferromagnec cookware (with water, oil, or food already inside) on the center of the glass ceramic top center.
-Now press ON/OFF buon on the control panel, this will turn the cooktop on. The power display will blink and sound an-
other indicator.
-The pre-set power level “5” is the default selecon as the device turns on.
-Using the +/- keys, you can change the sengs at any me, ranging from 1-10. This is considered to be the HEAT func-
on.
True Inducon’s Power Invariance Technology:
The maximum power of an individual burner level is at seng 10. But when operang both burners, their combined total
is level 10, meaning that when operang the two burners at the same me, they’ll self adjust levels accordingly.
When you increase the power of one side, the power output of the other side will reduce automacally (i.e., one side is at
6, the other burner automacally reduces power to level 4, creang a total max 10 seng).
If one side of the double burner is using HEAT funcon and the other side uses the TEMP sengs, the maximum HEAT
seng is “5”.
5

True Induction S2F2 Specifications

General

Brand	True Induction
Model	S2F2
Category	Cooktop
Language	English