EasyManuals Logo
Home>True>Exercise Bike>CS800

True CS800 Assembly Instructions

True CS800
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Assembly Instructions
1
Important TV Signal Requirement NTSC / ATSC TUNER (PS850 Touchscreen does not have TV tuner option)
Please note for optimal TV image results, sufficient signal strength must be received by the 15 Inch LCD
with Touch Screen display. It is the responsibility of the customers’ facility to provide the minimum signal
strength values listed below to each individual exercise machine.
dBmV dBm dBuV dBmV dBm dBuV
0 -48.8 60 -10 -58.8 50
15.5 -33.3 75.5 15.5 -33.3 75.5
NTSC / ATSC TUNER - 75 ohm
MAXIMUM --->
TUNER ---->
SIGNAL FORMAT --->
MEASUREMENT UNIT --->
MINIMUM --->
NTSC (analog)
ATSC (digital)
Basic Guidelines for Setting Up Your Exercise Equipment
After removing the exercise equipment from the packaging, place unit on a clean, level surface. Make sure
the electrical cord easily reaches a grounded three-pronged outlet and has enough slack to allow the deck
to incline without tightening the cord. Do not allow the exercise equipment to rest on the power cord.
Important Electrical Requirements
Your TRUE exercise equipment may require a dedicated and grounded outlet circuit. This means nothing
else can be plugged into the same circuit. Please reference your exercise equipments assembly
instructions and owners manual for specific information on your model.
Danger: Do not use an extension cord or ungrounded outlet.
The ground helps prevent electrical damage to your exercise equipment and enhances your safety by
helping to prevent shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the exercise equipment is properly grounded. Do not modify the plug provided with the exercise equipment
if it will not fit the outlet. Have a proper outlet installed by a qualified electrician.
TOOL REQUIREMENTS (not included): 7/16 Open End Wrench (two) #2 Phillips Screwdriver
CAUTION: It is recommended that two people attach display to treadmill.
NOTE: Remove Display components from packaging.
NOTE: Use the DISPLAY CONNECTION DIAGRAM and cable views in the steps below to identify exactly
where each cable is to be connected. Cables will be labeled near their connector with identifying names
such as those listed below in BOLD TEXT and in the instructions below.
Should you need technical assistance in assembly of your TRUE Fitness product, you can contact TRUE Fitness Technical
Support at 1-800-883-8783
____________________________________________________________________________________
TREADMILLS
15 INCH LCD with TOUCHSCREEN DISPLAY TREADMILL HARDWARE KIT
ITEM
DESCRIPTION
QTY
WHERE USED
a
15 inch LCD Display
1
Treadmill Display
b
Screw M5 w/ lock washer
4
Display Attachment
c
Auxiliary Power Supply
1
In Frame for Display Power
d
8 inch Wire Ties
4
Secure Power Supply
e
4 inch Wire Ties
2
Cable Management
f
Owners Manual CD
1
g
Warranty Card (on CD)
1

Other manuals for True CS800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the True CS800 and is the answer not in the manual?

True CS800 Specifications

General IconGeneral
BrandTrue
ModelCS800
CategoryExercise Bike
LanguageEnglish

Related product manuals