4. Knob Adjustment
Print Head Pressure Adjustment Knob has 5 levels’ adjustment. Different number means different pressure to the print head .
Due to media is aligned to the inbound of the printer mechanism, different media width requires the different pressure. Users can try
which level can meet their expectation.
Pressure level: 5>4>3>2>1 (5 is the highest)
If the label width is 4”, adjust both print head pressure to the same level.
If the label is less than 2” wide, increase the pressure of left adjustment knob and decrease the right side pressure.
To Next Page
Loading...
Need help?
General
