TSC Printronix MB340 User Manual

76
8. Wipe off the adhesive, particles, or dust from the cutter blade and cutter gate.
9. After cleaning the cutter blade, close the upper bar for the cutter gate ensuring the upper bar clicks in place.
10. Close the printhead ensuring the printhead is firmly secured in place.
11. Turn on the printer. The cutter blade will automatically sink into the chassis of the cutter module.
Note: The image below shows that the cutter blade has sunk into the chassis after turning on the printer.

TSC Printronix MB340 Specifications

General

Brand	TSC
Model	Printronix MB340
Category	Barcode Reader
Language	English