TSC TC200 Series User Manual

TC200/ TC300/ TC210/ TC310
Bar Code Printer Service Manual
17
3.3 Replacing the Head Open Sensor
1. Refer to section 3.2 to remove the lower cover.
2. Disconnect the connector on the main board.
Note:
The connector located on J601 for TC210/TC310 series.
The connector located on JP16 for TC200/TC300 series.
3. Remove 1 screw on the head open sensor PCB.
4. Reassemble the parts in the reverse procedures.

TSC TC200 Series Specifications

General

Brand	TSC
Model	TC200 Series
Category	Barcode Reader
Language	English