TSC TC200 Series User Manual

TC200/ TC300/ TC210/ TC310
Bar Code Printer Service Manual
37
 Please use 100% Ethenol. DO NOT use medical alcohol, which may damage the
printer head.
 Regularly clean the print head and supply sensors once change a new ribbon to
keep printer performance and extend printer life.
 Continuous printing will cause printer motor overheat. Printer will stop printing
automatically about 10~15 minutes until motor is cooling down. Please don't turn off
power when printer pauses or the data transfered to printer buffer will be lost.
 The maximum printing ratio per dot line is 15% for this printer. To print the full web
black line, the maximum black line height is limited to 40 dots, which is 5mm for 203
DPI resolution printer and 3.3mm for 300 DPI resolution printer.

TSC TC200 Series Specifications

General

Brand	TSC
Model	TC200 Series
Category	Barcode Reader
Language	English