- 26 -
4.2 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles
This printer has been fully tested before delivery. There should be no ribbon wrinkle presented on the
media for general-purpose printing application. Ribbon wrinkle is related to the media thickness, print
head pressure balance, ribbon film characteristics, print darkness setting…etc. In case the ribbon wrinkle
happens, please follow the instructions below to adjust the printer parts.
1. Wrinkle happens from label lower left
to upper right direction (“/”)
2. Wrinkle happens from label lower right
to upper left direction (“\”)
To Next Page
Loading...
Need help?
General
