TSC TTP-384M Service Manual

23
23
TTP-384M
Bar Code Printer Service Manual
3.10 Replacing the DC Motor
1. Refer to section 3.1 to remove the electronics cover.
2. Disconnect the DC motor connectors from the main board.
3. Remove 3 screws at the DC motor fixing plate.
4. Remove the DC motors by removing the 6 screws.
5. Replace the DC motors.
6. Reassemble the parts in the reverse procedures.
DC motor connectors
Screws
Screws
Screws

TSC TTP-384M Specifications

General

Brand	TSC
Model	TTP-384M
Category	Printer
Language	English