TSI Instruments AeroTrak+ User Manual

-2-
Thank you for purchasing the TSI
®
AeroTrak
®
+ A100
Portable Airborne Particle Counter (APC). This guide
will familiarize you with your particle counter and guide
you on taking a measurement.
Refer to the manual for more detailed information on
how to utilize a wide range of additional functionality to
facilitate testing for a variety of applications. Additional
information is also available at tsi.com/portables.
Safety
Please review the information below prior to use to
assure safe and proper handling of the AeroTrak
®
+
A100 Portable Airborne Particle Counter.
I M P O R T A N T
There are no user-serviceable parts inside the
instrument. Refer all repair and maintenance to
a qualified factory-authorized technician. All
maintenance and repair information in this
manual is included for use by a qualified factory-
authorized technician.
L A S E R W A R N I N G
The AeroTrak
®
+ Portable Airborne
Particle Counter is a Class I laser-based
instrument. During normal operation,
you will not be exposed to laser
radiation. However, precaution should be taken to
avoid exposure to hazardous radiation in the form of
intense, focused, visible light. Exposure to this light
may cause blindness. DO NOT remove any parts
from the particle counter unless you are specifically
told to do so in this manual. DO NOT remove the
housing or covers. There are no user-serviceable
components inside the housing.
W A R N I N G
The use of controls, adjustments, or
procedures other than those specified
in this manual may result in exposure
to hazardous optical radiation.
W A R N I N G
The battery supplied by TSI
®
(BAT-A100) has
built-in protection against explosion and fire
hazard. DO NOT use a substitute. DO NOT use
non-rechargeable batteries in this instrument. Fire,
explosions, or other hazards may result.
Unpacking
1. Carefully unpack the particle counter from the
shipping container and verify that all the items
listed in the following table are present.
2. Contact TSI
®
immediately if items are missing
or broken.
3. Additional items may be included if you ordered
accessories or spare parts.
Qty.
Item
Description
Part/Model
Reference
Picture
1
AeroTrak
®
+
Airborne
Particle
Counter
A100-31
A100-35
A100-50
A100-51
A100-55
1
Power
Supply
24 VDC,
5.0A, 100-
240 VAC,
KPPX-4
plug. (Power
cord included
is country
dependent)
PSU-A100
1
Country-
Specific
Power Cord
700057 (US)
700058 (UK)
700059 (Euro)
1 or 2
Battery Pack
(can install up
to 2 ea.)
BAT-A100
Qty = 1
3 m
(10 ft)
Sample
Tubing,
Clear
TUBE150-A100
3/8 ID x 1/2 OD
(28.3 or
50 L/min
models)
TUBE100-A100
1/2 ID x 5/8 OD
(100 L/min
model)
1
Sample
Probe,
Aluminum,
Isokinetic,
(connects to
instrument)
SPAL1-A100
(28.3 L/min)
SPAL5-A100
(50 L/min)
SPAL0-A100
(100 L/min)
1
Probe Mount
(for use with
sample tubing)
SPMT150-A100
(28.3 L/min &
50 L/mn)
SPMT100-A100
(100 L/min)

TSI Instruments AeroTrak+ Specifications

General

Brand	TSI Instruments
Model	AeroTrak+
Category	Laboratory Equipment
Language	English