TYT TC3000 UHF User Manual

13
4. Then you can receive a valid call. LED glows green during receiving.
5. If CTCSS/CDCSS or squelch tail elimination feature is set by your dealer:
1) Noise will be removed by the end of a conversation if roger tone is disabled.
2) Beep tone sounds by the end of a conversation if roger tone is enabled;
Please contact your dealer for more details.
Monitor
1. Press MONI key to monitor the current channel.
2. Release MONI key to exit.
Repeater/Talk Around
When the repeater doesn’t work or you are out of the communication range of the
repeater and within the communication range of your group member, you can bypass
the repeater and talk directly to your group member.
Press programmed “Repeater/Talk Around” key to select between repeater and talk
around mode. An alert tone indicates that radio operates in talk around mode. A different
alert tone indicates that you are talking via a repeater.
Repeater/Reverse Frequency
When you are out of the communication range of the repeater and within the
communication range of your group member, you can talk with your group member by
reverse frequency if your group member is within the communication range of the
repeater.
Press programmed “Repeater/Reverse Frequency” key to select between repeater and
reverse frequency. An alert tone indicates that radio operates in reverse frequency mode.
A different alert tone indicates that you are talking via a repeater.
Note: “Repeater/Talk Around” and “Repeater/Reverse Frequency” can’t be set
simultaneously in one radio.
Selectable Power
Each channel of the radio is set as different power levels that are user selectable. (High
power is forbidden in certain channels).
1. High power allows your talk to be heard from further distance.
2. Low power helps to save battery power.
Press programmed “power select” key to select high/low power. An alert tone indicates
that the radio operates at high power and another alert tone indicates low power.
Scan
Scan feature allows you to monitor all channels.
When scan feature is enabled, the radio will detect all channels. If an active channel is
detected, the radio will remain on that channel and you will be able to hear the
conversation.
Disable/Enable Scan Feature
1. Press scan key, scanning begins.
2. Press scan key again, scanning ends.
LED flashes green in scan mode.
Callback
Pressing PTT during scanning can callback on the callback channel. Please contact
your dealer for more details about callback channel.

TYT TC3000 UHF Specifications

General

Brand	TYT
Model	TC3000 UHF
Category	Two-Way Radio
Language	English