MAX-8 / MAX-M8 - Hardware Integration Manual
UBX-15030059 - R05 Page 2 of 31
Production Information
Document Information
Title MAX-8 / MAX-M8
Subtitle u-blox 8 / M8 GNSS modules
Document type Hardware Integration Manual
Document number UBX-15030059
Revision and date R05 7-Feb-2019
Document status Production Information
Product status
Corresponding content status
In Development /
Prototype
Objective Specification Target values. Revised and supplementary data will be published later.
Engineering Sample Advance Information Data based on early testing. Revised and supplementary data will be published later.
Initial Production Early Production Information Data from product verification. Revised and supplementary data may be published later.
Mass Production /
End of Life
Production Information Document contains the final product specification.
This document applies to the following products:
European Union regulatory compliance
MAX-8 / MAX-M8 complies with all relevant requirements for RED 2014/53/EU. The MAX-8 / MAX-M8 Declaration of
Conformity (DoC) is available at www.u-blox.com within Support > Product resources > Conformity Declaration.
Product name Type number Firmware version PCN reference
MAX-M8C MAX-M8C-0-10 ROM SPG 3.01 UBX-16013125
MAX-M8W MAX-M8W-0-10 ROM SPG 3.01 UBX-16013125
MAX-M8Q MAX-M8Q-0-10 ROM SPG 3.01 UBX-16013125
MAX-8Q MAX-8Q-0-10 ROM SPG 3.01 N/A
MAX-8C MAX-8C-0-10 ROM SPG 3.01 N/A
u-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this
document. Copying, reproduction, modification or disclosure to third parties of this
To Next Page
Need help?
General
