(MOTION INFINTY MODELS)
The revolutionary U SAFE uses an advanced accelerometer to detect and measure hard impacts. If you are
unresponsive, U SAFE can alert your contacts of your situation and GPS location. Requires a connected GPS
enabled mobile device.
NOTICE: Due to varying laws, please do NOT enter 911 or civil emergency services
as a USAFE emergency contact without their prior written permission.
F
E
A
T
U
R
E
N
E
W
1. Pair MOTION Infinity to mobile device & connect to
CLEARLink as shown on pages 8-10.
2. Agree to permissions & turn on mobile device GPS.
3. “ARM” U SAFE in CONFIGURATION menu.
4. Enter your “rider information” and up to 3
emergency contacts’ information.
NOTE: Phone numbers must include “+” and country code.
Example: +1 1112223333
NOTE: 1st emergency contact listed is primary contact,
and will also be auto-dialed by your phone
5. Tap “REGISTER/UPDATE” to update the U SAFE
database. This will also trigger an email notification
test message send to your listed contacts, informing
they have been listed by you as contacts.
U SAFE is now “ARMED” and ready. ARM/DISARM
anytime in CLEARLink configuration menu.
6. OPTIONAL: Use “TEST U SAFE” button to test the
sensor and the emergency notifications. Sensor will
be temporarily set to trigger with a light tap. The
notification message can be stopped or allowed to go
on and send out emergency notifications marked
“TEST ONLY” after 30 seconds.
NOTE: CLEARLink Mobile App must be opened in
foreground or background for USAFE to function.
24
To Next Page
Loading...
Need help?
General
