3
MANUAL / QUICK START GUIDE
4
Connecting your speaker to your device
You can connect your BOOM 3 or MEGABOOM 3 to your smartphone, tablet or
other device using the Bluetooth button. Out of the package, your BOOM 3 or
MEGABOOM 3 is ready to pair with your first Bluetooth device. Here’s how:
1. Turn the speaker on by pressing the power button on the top of the
speaker. The power indicator will glow white, the Bluetooth connect button
(above the power button) will blink white rapidly, and you will hear a tone
indicating the speaker is ready to pair.
2. On your Bluetooth device, go to the Bluetooth menu and scan for devices
(make sure Bluetooth is enabled).
3. Select BOOM 3 or MEGABOOM 3 from the list of devices.
Once paired and connected, you’ll hear an audible confirmation from the speaker.
This means your BOOM 3 or MEGABOOM 3 is ready to use. You can pair
additional devices with your speaker, see Connecting your speaker to additional
devices.
5
Connecting your speaker to additional devices
Your UE speaker will remember the last eight devices it connected with. Pairing
additional devices After you pair the first device, here’s how to pair additional
devices:
1. Turn the speaker on.
2. Hold down the Bluetooth button until you hear a tone. NOTE: The
Bluetooth connection button will blink rapidly, indicating that the speaker is
ready for pairing.
3. On your device, go to the Bluetooth menu and scan for devices.
4. Select the name of your speaker from the list of devices.
Once paired and connected, you’ll hear an audible confirmation from the speaker.
Your speaker is now ready to use with the device you added. Reconnecting to a
To Next Page
Loading...
Need help?
General
Weight and Dimensions
