Sampling Point
Frame Type
1% to 99%
Data frame, remote frame, error frame and overload frame
Voltage difference between cursors (△V)
Time difference between cursors (△T)
The reciprocal of △T (Hz) (1/△T)
Voltage and time at waveform point
Allows cursor display during automatic measurement
Manual
Tracking Mode
Indicator
Maximum minimum peak-to-peak median top bottom amplitude period average average
periodic RMS RMS overshoot preshoot frequency period rise time fall time positive pulse
width negative pulse width rise delay fall delay FRR FRF FFR FFF LRF LRR LFR LFF
positive duty ratio negative duty ratio phase area cycle area.
, , , , , , , , ,
, , , , , , , ,
, , , , , , , , , , , ,
, , , ,
Displays 5 measurements at the same time
Screen or cursor
Average, maximum, minimum, standard deviation and the number of measurements
6-bit hardware frequency meter
Measure
Cursor
Automatic Measurement
Number of Measurement
Measurement Range
Measurement Statistics
Frequency Meter
Mathematical Operations
Waveform Calculation
FFT Window Type
FFT Display
FFT Vertical Scale
A+B, A-B, A×B, A/B, FFT, logic operation, digital filtering, advanced operation
Rectangle, Hanning, Blackman, Hamming
Split screen; time base can be adjusted independently
Vrms, dBVrms
63
To Next Page
Loading...
Need help?
General
