UNI-T UT201 User Manual

Measurement Operation(2)
l When DC voltage measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test and remove testing leads
from the input terminals.
B. AC Voltage Measurement (see figure 4)
red black
( figure 4)
Warning
To avoid harms to you or damages to the Meter from
eletric shock, do not attempt to measure voltages
higher than 600V AC/DC, although readings may be
obtained.
The AC Voltage ranges are:
2.000V, 20.00V, 200.0V and 600V.
To measure AC voltage, connect the Meter as follows:
1. Insert the red test lead into the VΩ terminal
and the black test lead into the COM terminal.
2. Set the rotary switch to V
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
Model UT201/202: OPERATING MANUAL
16

UNI-T UT201 Specifications

General

Data hold	Yes
AC current range	2 - 400 A
AC voltage range	2 - 600 V
DC voltage range	0.2 - 600 V
Basic accuracy (DC voltage)	±(0.8%+1)
Basic accuracy (resistance)	±(1%+2)
Dimensions (WxDxH)	75.6 x 30 x 210 mm
Battery voltage	3 V

Weight and Dimensions

Weight	220 g