UNI-T UT30B User Manual

G.Make Measurements(9)
7. Transistor hFE Measurement (see figure 8)
1) Check that the transistor is
PNP or NPN type.
2) Connect the transistor to be
measured to the corresponding
jacks.
3) LCD display hFE reference value.
4) Measuring condition:Ibo 10µA,
Vce 3V
(figure 8)
25
Model UT30B/C/D/F: OPERATING MANUAL

UNI-T UT30B Specifications

General

Product type	Digital multimeter
AC voltage range	200 - 500 V
DC current range	0.02 - 10 A
DC voltage range	0.2 - 500 V
Basic accuracy (DC current)	±(1%+2)
Basic accuracy (DC voltage)	±(0.5%+2)
Basic accuracy (resistance)	±(0.8%+2)
Dimensions (WxDxH)	74 x 41 x 130 mm
Battery voltage	9 V
Battery low indication	Yes

Weight and Dimensions

Weight	160 g