UNI-T UT30C User Manual

B. Safety Rules(1)
CAUTION-FOR CONTINUED PROTECTION AGAINST FIRE, REPLACE
ONLY WITH FUSE OF THE SPECIFIED VOLTAGE AND CURRENT
RATINGS.
l Do not operate the meter unless the bottom case has been closed as
terminal can carry voltage.
l Inspect the insulation of the test leads and make sure there is no
damage to the test leads before using the meter.
l As soon as the battery indicator’s” “±appear, replace the battery to
ensure accurate readings.
l Set the meter to suitable function and range before each measurement.
l Tested values over the maximum range of each measurement can
cause damages to the meter or electric shock to users.
l To avoid damages of the meter, do not turn the rotary switch during
measurement.
l When measuring voltage higher than DC 60V or AC 30Vrms, pay
extra attention to avoid electric shock.
3
Model UT30B/C/D/F: OPERATING MANUAL

UNI-T UT30C Specifications

General

Data hold	Yes
Product type	Digital multimeter
AC voltage range	200 - 500 V
DC current range	0.02 - 10 A
DC voltage range	0.2 - 500 V
Basic accuracy (DC current)	±(1%+2)
Basic accuracy (DC voltage)	±(0.5%+2)
Basic accuracy (resistance)	±(0.8%+2)
Temperature measurement range	-40 - 1000 °C
Dimensions (WxDxH)	74 x 41 x 130 mm
Battery voltage	9 V

Weight and Dimensions

Weight	160 g