21 22
indicating the automatic power-off function is off, then set AP01.
Press ENTER to save and enter into next menu to record interval
automatically, press automatic add for a long time or press key to reduce
time, press automatic subtraction, time scope of the machine can be set is
0.5-255;Press key ENTER to save and enter into next menu-factory set.LCD
displays DEF? (Press key ENTER to restore factory set USB0, AP01, 60S,
clearing all record data. If press key MENU, it will enter into the original
measurement function. Under menu set mode, if power-off, the menu status
shall be stored automatically and be restored from save status after power-on,
without reset each time).
is open, LCD shall display indicator , and press key or to set AP00,
Able to use short probe s to measure high/low frequency scope
vibration respectively.
Notes:
Long probe L is only applicable to low frequency measurement, when
measurement accelerated and frequency exceeds 1 kHZ, please replace
short probe to measure again.
It will be powered off automatically 3 minutes later if without any operation.
X Maintenance
1 Working environment: UT313/UT315 vibration meter is precision
apparatus required to avoid collision, shock, moisture, strong power,
magnetic field, oil and dust.
2 Replace battery and maintenance
1 in working, LCD screen shall appear symbol , user needs to
replace battery timely in reference to illustration in the manual.
2 please draw out battery to avoid battery weeping, which shall cause
severe damage to the apparatus if you needn't use the test apparatus for
To Next Page
Loading...
Need help?
General
