8
UT501/UT502 OPERATING MANUAL
Danger
Use of instrument in a manual not specifed by the manufactuer may impair
safety features/protection provided by the equipment. Read the following safety
information carefully before using or servicing the instrument.
Do not apply more than 1000V DC or 750V AC.
Do not use the Meter around explosive gas, vapor or dust.
Do not use the Meter in a wet environment.
When using the test leads, keep your figures away from the lead contacts.
Keep your figures behind the finger guards on the leads.
Do not use the Meter with any parts or cover removed.
When carrying out insulation measurement, do not contact the circuit
under test.
To Next Page
Loading...
Need help?
General
