l Do not use or store the Meter in an environment of high temperature,
humidity
, explosive, inflammable and strong magnetic field. The performance
of the Meter may deteriorate after dampened.
l When using the test leads, keep your fingers behind the finger guards.
l Disconnect circuit power and discharge all high-voltage capacitors before
testing resistance, continuity and diodes.
l Before measuring current, check the Meterís fuses and turn off the current
to be tested before connecting the Meter to the circuit. After connecting
the circuit reliably, turn the current to be tested on.
l Replace the battery as soon as the battery indicator
appears. With a
low battery
, the Meter might produce false readings that can lead to electric
shock and personal injury.
l When servicing the Meter, use only the same model number or identical
electrical specifications replacement parts.
l The internal circuit of the Meter shall not be altered at will to avoid damage
of the Meter and any accident.
l Soft cloth and mild detergent should be used to clean the surface of the
Meter when servicing. No abrasive and solvent should be used to prevent
the surface of the Meter from corrosion, damage and accident.
l The Meter is suitable for indoor use.
Model UT61A/61B/61C/61D/61E: OPERATING MANUAL
8
To Next Page
Loading...
Need help?
General
