UNI-T UTD2000CEX-II Series User Manual

32X Averaged
Note: Average and high resolution uses different average methods. The
former is multiple sampling average, the latter is single sampling average.
Unaveraged
6.3 Storage Depth
The storage depth is the number of waveforms that can be stored in the
oscilloscope during a trigger acquisition. It reflects the memory storage
capacity of the acquisition. UTD2000CEX-II series’ standard is 25kpts
storage depth (per channel).
Chapter 7 - Display System Setting
You can set the display type of the waveform, display format, duration, grid
brightness, and waveform brightness. Press the DISPLAY key to enter the
display menu.
Display menu
Descriptions
Display level on time scale
Display Lissajous graph
of CH1~CH2 waveforms
Using lines to display between samples
Displays points directly
waveform on screen refreshs
with normal refresh rate
The waveform data on the screen
refreshs after specified time
The waveform data on the screen is
maintained until the function is off
Set the waveform brightness, Use
Multipurpose knob to adjust settings
Options
YT
XY
Vector
Point
Full
Grid
Crosshair
Frame
Automatic
Short afterglow
Long afterglow
Infinite
persistence
1%~100%
Functions
Type
Format
grid
Afterglow
time
Waveform
Brightness
UTD2000CEX-II User Manual

UNI-T UTD2000CEX-II Series Specifications

General

Brand	UNI-T
Model	UTD2000CEX-II Series
Category	Test Equipment
Language	English