EasyManuals Logo
Home>Unison Research>Amplifier>Unico 90

Unison Research Unico 90 User Manual

Unison Research Unico 90
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Unison Research
Unico 90
1
1. UNPACKAGING
Please make sure that the packaging is undamaged and the product has not
suffered from rough handling during transportation, otherwise we highly
recommend to contact your Authorised Dealer for advice before proceeding
to install the unit.
Carefully remove your amplifier and all the accessories from the carton.
Inside the package you’ll find:
- 1 Unico90 amplifier
- 1 power supply cable
- 1 user manual
- 1 remote control handset
IMPORTANT! After unpacking please allow some hours before
operating the device in order to let it adapt to the room
temperature. This time is needed to prevent any possible damage
due to the condensation which can eventually form during
transportation. Please note, that condensation can form every time
the amplifier is moved from a cold to a warm place.
Keep all packing materials: every time you will need to transport the Unico
90 , its original purpose-designed carton will provide the safest packing.
2. INSTALLATION
The Unico 90 should be positioned in a safe place on a plane surface.
Adequate clearance must be left above and around the device to guarantee a
correct ventilation.
We also suggest to leave enough free space behind your Unico 90 to allow
the connecting cables sufficient room to bend without crimping or strain,
and we strongly recommend not to place the device directly on a power
amplifier top surface or, in general, close to a heat source.

Other manuals for Unison Research Unico 90

Questions and Answers:

Unison Research Unico 90 Specifications

Output Power IconOutput Power
output power at 8Ω100+100 W RMS
output power at 4Ω180+180 W RMS
Frequency Response IconFrequency Response
frequency response at -1dB12Hz to 45kHz
frequency response at -3dB6Hz to 80kHz
Input Specifications IconInput Specifications
input impedance21kΩ //300pF
input sensitivity860mV RMS
input6 line (3 unbalanced, 2 balanced, 1 'bypass' unbalanced)
Output Specifications IconOutput Specifications
line outputs1 tape, 1 sub (volume controlled)
output connectors4 + 4 bi-wiring
output resistance<0.4 ohm, resistive on all audio frequencies
Power and Consumption IconPower and Consumption
power consumption550 W (at max power on 8 ohm)
global feedback factor0 dB
THD at 1kHz, 1 W< 0.15%
Weight and Dimensions IconWeight and Dimensions
dimensions43.5cm x 18 cm x 44 cm
net weight20 kg

Related product manuals