Unitech MS250 User Manual

Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
46
scanning code, user may refer to the following table to know what kind of bar code is
being scanned.
Please refer to the table below for matching code
ID of codes read in.
Code Type
ID
Code Type
ID
UPC-A
A
UPC-E
E
EAN-8
FF
EAN-13
F
CODE 39
M
CODE 128
K
Interleave 25
I
Industrial 25
H
Matrix 25
I
Codabar/NW7
N
CODE 93
L
CODE 11
L
China Postage
C
MSI
O
LCD25
Q
PLESSEY
P
GS1 DataBar Omnidirectional
U
GS1 DataBar Expanded
W
GS1 DataBar Limited
V
User Define Code ID
To set the code ID:
1. Scan the symbologies label.
2. Go to the ASCII Tables in Appendix B, scan label that represents the desired code
ID.
Note:
User define code ID will override default value. Program will not check the conflict. It
is possible to have more than two symbologies which have same code ID.
UPC-A
UPC-E
EAN-13/JAN-13

Unitech MS250 Specifications

General

Type	Handheld bar code reader
Sensor type	CCD
Scanner type	1D
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN 128, EAN-13, EAN-8, GS1 DataBar, ISBN, Interleaved 2 of 5, MSI, Plessey, UPC-A, UPC-E
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	RS-232, USB
Connectivity technology	Wired
Power source type	DC
AC adapter output voltage	5 V
Buzzer	Yes
Certification	CE, FCC, BSMI, VCCI
Product color	Black
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 95 %

Weight and Dimensions

Depth	62.5 mm
Width	79 mm
Height	163.3 mm
Weight	83 g