Unitech MS650 Quick Guide

- 5 - - 6 -
OUT OF THE BOX
Regulatory
Compliance
Statements
Spare Velcro Strap
USB Charger Cable
Wireless CCD
Ring Scanner
Quick Guide
1
2
MS650 Wireless CCD
Ring Scanner
Quick
G
uid
e
because we care
Regulatory Compliance Statements Part No. XXXXXXX
FCC Warning Statement
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protect-
ion against harmful interference in a residential installation.
CHARGING THE BATTERY
ATTENTION
1. Flip open the micro USB port on the scanner.
2. Insert the micro USB connector into the port on the
scanner and USB A connector into a USB port on
the host PC.
3. Keep charging until the red LED indicator turns off.
1. It is strongly recommended to dry your hand and the
velcro strap if either of them is soaking wet. The
scanner may still work in wet condition, but its
touch-activated button can be too responsive so as
to trigger the scanning from time to time, draining
battery quickly as a result.
2. The following gloves have been tested to be working
with the touch-activated button: latex examination
glove, antistatic glove, white cotton glove (with or
without latex coating), safety glove, and rubber glove.
However, it is still recommended to operate with
bare hand to ensure the responsiveness of touch-
activated button.
Scanner
Micro USB
USB A
Host

Unitech MS650 Specifications

General

Brand	Unitech
Model	MS650
Category	Barcode Reader
Language	English