TEST BARCODES
EAN
Code 128
12345678
Code 39
CODE-39 TEST
Interleaved 2 of 5
9876543210
7164154
942052
TROUBLESHOOTING
Q: Your Bluetooth is unable to detect the scanner.
A:
(1) Make sure your Bluetooth version is 4.0 or later.
(2) Restart your Bluetooth or Host device and try again, following
the instruction on page 11.
(3) Make sure the scanner is in BT-HID mode (see page 10). If the
scanner is discoverable, its LED indicator will be flashing Blue.
(4) The scanner might be powered off. By default the scanner goes
to sleep after 30 seconds of inactivity. You can re-activate the
scanner by touching the scan button on both sides. Alternatively,
you may also increase the power off timeout (see page 13) so
that the scanner will stay awake longer.
Q: Your Bluetooth can detect the scanner, but it cannot pair with
the scanner successfully.
(1) Make sure your Bluetooth version is 4.0 or later.
(2) Restart your Bluetooth or Host device and try again, following
the instruction on page 11.
(3) Make sure to remove the scanner from the Bluetooth of host
device that has previously paired with the scanner.
(4) Follow the instruction on page 11 and try again.
A:
Q: The scanner does not read barcode instantly.
(1) Barcode print quality is too poor.
(2) The ambient light is too weak. If that’s the case, configure the
LED illumination to auto-adaptive or always on (see page 16)
A:
Q: The scanner does not output barcode data as expected.
(1) The keyboard layout of scanner does not match that of your
host device. Try configuring keyboard layout on page 17 - 20.
A:
- 35 - - 36-
To Previous Page
Loading...
Need help?
General
