Unitech MS842P Quick Start Guide

Plug the USB Dongle to a free USB port of a host computer. The
MS842P is now ready to use.
SETUP AND INSTALLATION
Connect the power supply cable to the bottom of the MS842P and to
an electrical outlet. Charge for at least 5 hours.
The Unitech MS842P Wireless Scanner
Installation Instructions & Popular Conguration Barcodes
Scan the barcode on the USB Dongle.
The following steps will walk you through the installation process.
Power On
Step 1:
ChargE
Step 2:
SETTINGS AND CONFIGURATION
The following section covers the most common
conguration settings for your MS842P scanner.
For additional conguration options please visit
unitechscanners.com/MS842P and select the
“Download” tab. You will nd the User’s Manual and a
variety of other resources.
Switch the power button to the on position.
Flash Mode
Scan here to switch to Flash Mode from the default Trigger Mode. In
Flash mode, the MS842P will function automatically. It will scan at a
set interval.
Flash Mode
Scan here to switch back to Trigger Mode. In Trigger Mode, the
MS842P will scan only when the scanner button is pressed.
Trigger Mode
Manual Trigger
Tab Mode
You may wish to set your scanner to “Tab Mode.” In this mode, data
will tab over to the next column as you scan instead of jumping to
the next line. Scan here to switch to Tab Mode from the default Enter
Mode.
Tab Mode
MS842P Quick Start Guide
Connect dongle to host
Step 4:
Scan Dongle
Step 3:
Open a word processing program such as Microsoft Word or
Notepad on your host. Now scan the following barcode:
Test & Finish
If the word “Unitech” appears on the screen you have succesfully
installed your scanner. Congratulations!

Unitech MS842P Specifications

General

Type	Handheld bar code reader
Sensor type	CMOS
Scanner type	1D/2D
Tilt reading angle	-60 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 25 (IR 2 of 5), Code 39, Code 93, EAN-13, GS1-128 (UCC/EAN-128), JAN, MSI, Telepen, Trioptic, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, MaxiCode, Micro QR Code, PDF417, QR Code, TLC-39
USB version	2.0
Wireless range	10 m
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Certification	CE, FCC, BSMI, VCCI
Product color	Black, Grey, Yellow
Housing material	-
International Protection (IP) code	IP54
Battery life	10 h
Charging time	4 h
Input voltage	5 V
Battery capacity	1620 mAh
Power consumption	400 mA
Power source type	DC
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	74 mm
Width	89 mm
Height	176 mm
Weight	200 g
Base dimensions	73 x 95 x 200 mm